Allied Telesis AT-S62 - Manual (Page 266)

Chapter 14: Access Control Lists
266 Section II: Advanced Operations
Displaying ACLs
To display the ACLs on a switch, perform this procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 77 on page
259.
3. From the Access Control Lists (ACL) menu, type 4 to selection Show
ACLs.
An example of the Show ACLs window is illustrated in Figure 81.
Figure 81. Show Classifiers Menu
4. To view the details of an ACL, type D to select Detail Classifier
Display.
The following prompt is displayed:
Enter ACL ID : [0 to 250] -> 0
5. Enter the ID number of the ACL you want to display.
The details of the selected ACL are displayed.
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Show ACLs
Number of ACLs: 12
ID
Description
-----------------------------------------------
1
IP - deny
2 HTTP - permit
3 TCP - deny
4 Src22.49 - deny
5 P-149.22.22.22
6 Dst22.50
7 ARP packets - deny
D - Detail ACL Display
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?