Allied Telesis AT-S62 - Manual (Page 246)

Chapter 13: Classifiers
246 Section II: Advanced Operations
Deleting a Classifier
This procedure deletes a classifier from the switch. To delete a classifier,
you need to know its ID number. To view the classifier ID numbers, refer to
“Displaying Classifiers” on page 248.
You cannot delete a classifier if it belongs to an ACL or QoS policy. You
must first remove a classifier from its ACL and QoS policy assignments
before you can delete it.
To delete a classifier, do the following:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 1 to select Classifier
Configuration.
The Classifier Configuration menu is shown in Figure 67 on page 241.
3. From the Classifier Configuration menu, type 3 to select Destroy
Classifier.
The following prompt is displayed:
Enter Classifier ID : [1 to 9999] -> 1
4. Enter the ID number of the classifier to be deleted.
The management software displays the details of the selected
classifier. Use this window to verify that you selected the correct
classifier.
5. If this is the correct classifier, type D to select Destroy Classifier.
The classifier is deleted from the switch.
6. To delete additional classifiers, repeat this procedure starting with step
3.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.