Allied Telesis AT-S62 - Manual (Page 129)

AT-S62 Management Software Menus Interface User’s Guide
Section I: Basic Operations 129
5 - Display Specified MAC
Displays the port number on which a MAC address was assigned or
learned.
In some situations, you might want to know on which port a particular
MAC address was learned. You could display the MAC address table
and scroll through the list looking for the MAC address. But if the
switch is part of a large network, finding the address could prove
difficult.
This menu option offers an easier way. You can specify the MAC
address and let the management software automatically locate the
port on the switch where the device is connected.
6 - Display by VLAN ID
Displays all the static and dynamic addresses learned on the tagged
and untagged ports of a specific VLAN. When you select this option,
you are prompted for the VLAN ID number of the VLAN. You can
specify only one VLAN at a time
7 - Display on Base Ports
This displays the static and dynamic MAC addresses learned on the
base ports. Base ports are the standard ports on the switch, excluding
optional expansion modules, GBIC modules, or SFP modules.