Allied Telesis AT-S62 - Manual (Page 192)

Chapter 11: File Downloads and Uploads
192 Section II: Advanced Operations
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
Note: Please select 1K Xmodem protocol for faster
download.
8. Type Y for Yes.
The prompt “Downloading” is displayed.
9. Begin the file transfer.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
As an example, steps 10 through 13 illustrate how to download a file
using the Hilgraeve HyperTerminal program.
10. From the HyperTerminal main window, select the Transfer menu.
Then select Send File from the pull-down menu, as shown in Figure
52.
Figure 52. Local Management Window
The Send File window is shown in Figure 53.
Figure 53. Send File Window