beautypg.com

Displaying ssh information, Figure 254: show server information menu – Allied Telesis AT-S62 User Manual

Page 744

background image

Chapter 33: Secure Shell (SSH) Protocol

744

Section VII: Management Security

Displaying SSH Information

To display SSH server information, perform the following procedure:

1. From the Main Menu, type 7 to select Security and Services.

2. From the Security and Services menu, type 8 to select Secure Shell

(SSH).

The Secure Shell (SSH) Menu is shown in Figure 253 on page 742.

3. From the Secure Shell (SSH) menu, select 6 - Show Server

information to display the SSH Server data.

The Show Server Information Menu is shown in Figure 254.

Figure 254. Show Server Information Menu

The following information is displayed:

ˆ

Versions Supported: Indicates the versions of SSH which are
supported by the AT-S62 software.

ˆ

Server Status: Indicates whether or not the SSH server is enabled or
disabled.

ˆ

Server Port: Indicates the well-known port for SSH. The default is port
22.

Allied Telesyn Ethernet Switch - AT-8524M - AT-S62

Production Switch

User: Manager

11:20:02 02-Jan-2006

Show Server Information Menu

Versions Supported ....... 1.3, 1.5, 2.0
Server Status ............ Enabled
Server Port .............. 22
Host Key ID .............. 200
Host Key Bits ............ 1024
Server Key ID ............ 250
Server Key Bits .......... 768
Server Key Expiry ........ 0 hours
Login Timeout ............ 180 seconds
Authentication Available . Password
Ciphers Available ........ 3DES, 128 bit AES, 192 bit AES,256 bit AES,

Arcfour (RC4)

MACs Available ........... hmac-sha1, hmac-md5
Data Compression ......... Available

R - Return to Previous Menu

Enter your selection?