Allied Telesis AT-S62 - Manual (Page 185)

AT-S62 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 185
Displaying System Files
Use this procedure to display a list of the system files currently stored on
the switch. For information about shortcuts for specifying file names, see
“File Naming Conventions” on page 175.
To display a list of current system file names, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 9 to select System
Utilities.
3. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is shown in Figure 48 on page 177.
4. From the File Operations menu, type 8 to select List Files.
The following prompt is displayed:
Enter file name pattern to list:
5. Enter a configuration file name or pattern using the wildcard “*”. Below
are examples of how to use the wildcard to display different files.
To display a list of all the files, enter:
*.*
To display a list of the certificate files, enter:
*.cer
To display a list of the configuration files, enter:
*.cfg
To display a list of the key files, enter:
*.key
To display a list of the files that begin with the letter t, enter:
t*.*