Allied Telesis AT-S62 - Manual (Page 298)

Chapter 15: Quality of Service
298 Section II: Advanced Operations
The Show Traffic Classes menu provides the following information:
ID
The traffic class’ ID number.
Description
A description of the traffic class.
Parent Policy ID
The ID number of the policy where the traffic class is assigned. A traffic
class can belong to only one policy at a time.
Active
The status of the traffic class. If the traffic class is part of a QoS policy
that is assigned to one or more ports, the traffic class is deemed
active. If the traffic class has not been assigned to a policy or if the
policy has not been assigned to any ports, the traffic class is deemed
inactive.
5. To display the specifics of a traffic class, type D to select Detail Traffic
Class Display.
6. When prompted, enter the ID number of the traffic class you want to
view. You can display only one traffic class at a time.
The specifics of the traffic class are displayed in the Detail Traffic
Class Display. For definitions of the parameters, refer to “Creating a
Traffic Class” on page 290.