Allied Telesis AT-S62 - Manual (Page 369)

AT-S62 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 369
A web browser management session can have more than one TCP
connection open at a time. The different connections carry different
packets of the management session.
You cannot change any of the information in this table. The only
operating parameter on the switch that affects management TCP
connections that you can adjust, other than enabling or disabling the
servers, is the TCP port used by the web browser server. The default
values are port 80 for HTTP and 443 for HTTPS. For instructions on
how to change this setting, refer to “Configuring the Web Server” on
page 683. The management software does not allow you to change
the default port number of 23 for Telnet connections or 22 for SSH
connections.