Allied Telesis AT-S62 - Manual (Page 22)

Preface
22
How This Guide is Organized
This manual is divided into the following sections.
Section I: Basic Operations
The chapters in this section explain how to perform basic switch
operations, such as setting port parameters, creating port trunks, and
viewing the MAC address table.
Section II: Advanced Operations
The chapters in this section explain some of the more advanced
operations, such as using the file system, downloading and uploading
files, and configuring Quality of Service.
Section III: SNMPv3 Operations
The chapter in this section explains how to configure the switch for
SNMPv3. (The instructions for SNMPv1 and SNMPv2 are in Section 1,
Basic Operations.)
Section IV: Spanning Tree Protocols
The chapters in this section explain the Spanning Tree, Rapid Spanning
Tree, and Multiple Spanning Tree Protocols.
Section V: Virtual LANs
The chapters in this section explain port-based and tagged VLANs,
GVRP, multiple VLAN modes, and protected ports VLANs.
Section VI: Port Security
The chapters in this section explain MAC address-based port security and
802.1x port-based access control.
Section VII: Management Security
The chapters in this section explain the management security features,
such as the Secure Sockets Layer (SSL) and the Secure Shell (SSH)
protocols.