Allied Telesis AT-S62 - Manual (Page 673)

AT-S62 Management Software Menus Interface User’s Guide
Section VI: Port Security 673
characters, such as asterisks or exclamation points. The username is
case sensitive.
6 - User Password
This parameter specifies the password for the switch port. The port
sends the password to the authentication server for verification when
the port logs on to the network. The password can be from 1 to 16
alphanumeric characters (A to Z, a to z, 1 to 9). Do not use spaces or
special characters, such as asterisks or exclamation points. The
password is case sensitive.
7. Repeat this procedure starting with Step 4 to configure additional
supplicant ports on the switch.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.