Allied Telesis AT-S62 - Manual (Page 232)

Chapter 12: Event Log and Syslog Servers
232 Section II: Advanced Operations
Displaying a
Syslog Server
Definition
To display the details of an existing syslog server definition, perform the
following procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 8 to select Event Log.
The Event Log menu is shown in Figure 60 on page 218.
3. From the Event Log menu, type L to select Configure Log Outputs.
The Configure Log Outputs menu is shown in Figure 62 on page 223.
4. Type 4 to select View Log Output Details.
The following prompt is displayed:
Enter output ID to view [2 to 20] -> 2
5. Enter the ID number of the syslog server definition you want to view.
You can enter only one ID number at a time.
The Syslog Server Definition window is displayed with the
specifications of the definition. For an explanation of the parameters,
refer to “Creating a Syslog Server Definition” on page 226.