Allied Telesis AT-S62 - Manual (Page 500)

Chapter 22: Spanning Tree and Rapid Spanning Tree Protocols
500 Section IV: Spanning Tree Protocols
The Display STP Port Configuration menu is shown in Figure 167.
Figure 167. Display STP Port Configuration Menu
The information in the menu is as follows:
Port - The port number.
State - Current state of the port. The possible states are Enabled or
Disabled.
Cost - Port cost of the port. The default is Auto-Update.
Priority - The number used as a tie-breaker when two or more ports
have equal costs to the root bridge.
Allied Telesyn AT-8400 Series AT-8524M - AT-S60
Production Switch
User: Manager 11:20:02 02-Jan-2006
Display STP Port Configuration
Port State Cost Priority
----------------------------------------------
1
Enabled Auto-Update 128
2 Enabled Auto-Update 128
3 Enabled Auto-Update 128
4 Enabled Auto-Update 128
5 Enabled Auto-Update 128
6 Enabled Auto-Update 128
7 Enabled Auto-Update 128
8 Enabled Auto-Update 128
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?