Allied Telesis AT-S62 - Manual (Page 725)

AT-S62 Management Software Menus Interface User’s Guide
Section VII: Management Security 725
Modifying a Certificate
The procedure in this section modifies a certificate. (The certificate to be
modified must be in the certificate database.) Here are the certificate items
you can modify:
ˆ State - trusted or untrusted
ˆ Type - EE, CA, or Self
Note
These parameters have no affect on the operation of a certificate.
They are only included for informational purposes when the
certificate is displayed in the certificate database.
This procedure starts from the X509 Certificate Management menu. If you
are unsure how to access the menu, perform steps 1 to 4 in the procedure
“Adding a Certificate to the Database” on page 722.
To modify a certificate, perform the following procedure:
1. From the X509 Certificate Management menu, type 4 to select Modify
Certificate. The following message is displayed:
Enter a certificate name ->
2. Enter the name of the certificate you want to modify. (This field is case-
sensitive.)
The Modify Certificate Menu is shown in Figure 247.
Figure 247. Modify Certificate Menu
Note
Option 1 - Certificate Name cannot be changed.
Allied Telesyn Ethernet Switch - AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Modify Certificate Menu
1 - Certificate Name................. Switch12
2 - State ........................... Trusted
3 - Type ............................ Self
4 - Modify Certificate
R - Return to Previous Menu
Enter your selection?