Allied Telesis AT-S62 - Manual (Page 674)

Chapter 29: 802.1x Port-based Network Access Control
674 Section VI: Port Security
Displaying the Port Access Parameters
To display the port access parameters for the ports on the switch, perform
the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 103 on page 313.
2. From the Security and Services menu, type 2 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 229 on
page 662.
3. From the Port Access Control menu, type 6 to select Display Port
Access status.
The Display Port Access Status menu is shown in Figure 235.
Figure 235. Display Port Access Status Menu
The Display Port Access Status menu displays a table that contains
the following columns of information:
Port
Port number.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Marketing
User: Manager 11:20:02 02-Mar-2006
Display Port Access Status
Port PortRole AuthMode State Additional Info
-----------------------------------------------------------------------
1 None
------ -------------------
2 Authenticator 802.1x Connecting -------------------
3 Authenticator 802.1x Authenticated 00:a0:d2:18:1a:c8
4 Authenticator MAC Based Connecting -------------------
5 None ------ -------------------
6 None ------ -------------------
7 None ------ -------------------
8 Supplicant Disabled -------------------
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?