Allied Telesis AT-S62 - Manual (Page 26)

Preface
26
New Features History
The following subsection contains the new features in the AT-S62
management software.
Version 1.4.0
Table 1 lists the new features in version 1.4.0 of the AT-S62 management
software.
Table 1. New Features in AT-S62 Version 1.4.0
Change Chapter and Procedure
Fan Control Feature for the AT-8524POE Switch
New feature. Chapter 3, “Basic Switch Parameters” on page 49
New procedure:
ˆ “Setting Fan Control” on page 69
Quality of Service - Flow Groups and Traffic Classes
Added the following new parameters to
QoS flow groups and traffic classes:
ˆ ToS parameter for replacing the
Type of Service field of IPv4
packets.
ˆ Move ToS to Priority parameter for
replacing the value in the 802.1p
priority field with the value in the
ToS priority field in IPv4 packets.
ˆ Move Priority to ToS parameter for
replacing the value in the ToS
priority field with the 802.1p priority
field in IPv4 packets.
Chapter 15, “Quality of Service” on page 267
Modified procedures:
ˆ “Creating a Flow Group” on page 283
ˆ “Modifying a Flow Group” on page 285
ˆ “Creating a Traffic Class” on page 290
ˆ “Modifying a Traffic Class” on page 294
Quality of Service - Policies
Added the following new parameters to
QoS policies:
ˆ ToS, Move ToS to Priority, and
Move Priority to ToS, as defined
above.
ˆ Send to Mirror Port parameter for
copying traffic to a destination
mirror port.
Chapter 15, “Quality of Service” on page 267
Modified procedures:
ˆ “Creating a Policy” on page 299
ˆ “Modifying a Policy” on page 302