Allied Telesis AT-S62 - Manual (Page 296)

Chapter 15: Quality of Service
296 Section II: Advanced Operations
Deleting a Traffic
Class
To delete a traffic class, do the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 87 on page 283.
3. From the Quality of Service (QoS) menu, type 2 to select Traffic Class
Configuration.
The Traffic Class Configuration menu is shown in Figure 94 on page
290.
4. Type 3 to select Destroy Traffic Class.
The following prompt is displayed:
Available Traffic Class(es): 0-7
Enter Traffic Class ID : [0 to 511] -> 0
5. Enter the ID number of the traffic class you want to delete. You can
delete only one traffic class at a time.
The selected traffic class is displayed in the Destroy Traffic Class
menu. An example is shown in Figure 97. You can use the menu to
verify that you are deleting the correct traffic class.
Figure 97. Destroy Traffic Class Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Mar-2006
Destroy Traffic Class
1 - Traffic Class ID .......... 15
2 - Description ............... Video2
3 - Exceed Action ............. Drop
4 - Exceed Remark Value ....... 0
5 - DSCP value ................ 0
6 - Max bandwidth ............. 0
7 - Burst Size ................ 0
8 - Priority .................. 0
9 - Remark Priority ........... No
A - ToS .......................
B - Move ToS to Priority ...... No
D - Move Priority to ToS ...... No
E - Flow Group List ........... 17
D - Destroy Traffic Class
R - Return to Previous Menu
Enter your selection?