Allied Telesis AT-S62 - Manual (Page 208)

Chapter 11: File Downloads and Uploads
208 Section II: Advanced Operations
The following message is displayed:
Getting the file from Remote TFTP Server - Please wait
...
9. If you have not already done so, start the TFTP server software.
After downloading the system file, the switch displays the following
message:
File received successfully!
10. If you downloaded a new configuration file and want to make it the
switch’s active boot file, go to “Setting the Active Boot Configuration
File” on page 179. If you downloaded a CA certificate and want to add
it to the certificate database, refer to “Adding a Certificate to the
Database” on page 722.