Allied Telesis AT-S62 - Manual (Page 288)

Chapter 15: Quality of Service
288 Section II: Advanced Operations
6. Type D to delete the flow group.
The flow group is deleted from the switch. The group is removed from
any traffic classes to which it is assigned.
7. To delete another flow group, repeat this procedure starting with step
4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Displaying Flow
Groups
To display flow groups, do the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 87 on page 283.
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
The Flow Group Configuration menu is shown in Figure 88 on page
283.
4. Type 4 to select Show Flow Groups.
The Show Flow Groups menu is shown in Figure 92.
Figure 92. Show Flow Groups Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Mar-2006
Show Flow Groups
Number of Flow Groups: 5
Parent
ID Description Traffic Class ID Active
------------------------------------------------------------
0
Dev database 22 Yes
1 Inv database 5 No
2 Video1 14 Yes
3 Video2 2 Yes
4 Demo dev 1 Yes
D - Display Flow Group Details
U - Update Display
R - Return to Previous Menu
Enter your selection?