Allied Telesis AT-S62 - Manual (Page 302)

Chapter 15: Quality of Service
302 Section II: Advanced Operations
Modifying a
Policy
To modify a policy, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 87 on page 283.
3. Type 3 to select Policy Configuration.
The Policy Configuration menu is shown in Figure 99 on page 299.
4. From the Policy Configuration menu, type 2 to select Modify Policy.
The following prompt is displayed:
Available Policy(ies): 0-4
Enter Policy ID : [0 to 255] -> 0
5. Enter the ID number of the policy you want to modify. You can modify
only one policy at a time.
The selected policy is displayed in the Modify Policy menu. An
example is shown in Figure 101.
Figure 101. Modify Policy Menu
6. Modify the settings as needed. For parameter definitions, refer to
“Creating a Policy” on page 299.
When modifying a policy, note the following:
ˆ You cannot change a traffic class’ ID number.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Mar-2006
Modify Policy
1 - Policy ID ................ 4
2 - Description .............. VoIP flow
3 - Remark DSCP .............. None
4 - DSCP value ...............
5 - ToS ......................
6 - Move ToS to Priority ..... No
7 - Move Priority to ToS ..... No
8 - Send to Mirror Port ...... No
9 - Traffic Class List ....... 15
A - Ingress Port List ........ 7
B - Egress Port ..............
M - Modify Policy
R - Return to Previous Menu
Enter your selection?