Allied Telesis AT-S62 - Manual (Page 60)

Chapter 3: Basic Switch Parameters
60 Section I: Basic Operations
2. Reboot the switch. For instructions, refer to “Rebooting a Switch” on
page 57.
3. When the switch displays “Press B to go to Boot prompt,” type S
or s.
The switch continues its normal boot up and initialization process.
Once complete, the management software automatically logs you in
with manager access and displays the command line prompt. You are
not prompted for a login username or password.
4. Type menu to display the Main Menu.
5. Follow the procedure in “Changing the Manager or Operator
Password” on page 58 to reset the manager password.
This completes the procedure for resetting the manager password.
You can continue to manage the switch or you can quit from the
management session. You must use the new password the next time
you log on to the switch to start another management session.