Allied Telesis AT-S62 - Manual (Page 768)

Chapter 35: Management Access Control List
768 Section VII: Management Security
Modifying an ACE
To modify an ACE, you need to know its identification number. To view the
identification numbers of the ACEs, refer to “Displaying the ACEs” on
page 771.
To modify an ACE, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 52.
2. From the System Administration menu, type 7 to select Management
ACL.
The Management ACL Configuration menu is shown in Figure 260 on
page 764.
3. From the Management ACL Configuration menu, type 3 to select
Modify Management ACL Entry.
The following prompt is displayed:
Enter the entry ID : [1 to 256] -> 1
4. Enter the identification number of the ACE to modify. You can modify
one ACE at a time.
The specifications of the selected ACE are displayed in the Modify
Management ACL Entry window. An example of the window is shown
in Figure 261.
Figure 261. Modify Management ACL Entry
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Marketing
User: Manager 11:20:02 02-Mar-2006
Modify Management ACL Entry
Configuring Management ACL
1 - ID .......................... 11
2 - IP Address .................. 149.44.44.44
3 - Network Mask ................ 255.255.255.255
4 - Application(s) .............. Telnet,Ping
M - Modify Management ACL Entry
R - Return to Previous Menu
Enter your selection?