Allied Telesis AT-S62 - Manual (Page 329)

AT-S62 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 329
Displaying a List of Host Nodes
To view a list of the multicast groups and host nodes on a switch, perform
the following procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 109 on page
326.
2. From the Advanced Configuration menu, type 1 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu is shown in Figure 110 on
page 326.
3. From the IGMP Snooping Configuration menu, type 6 to select View
Multicast Host List.
The View Multicast Host List is shown in Figure 111.
Figure 111. View Multicast Hosts List Menu
The information in this menu is for viewing purposes only. The columns
are defined below:
Multicast Group - The multicast address of the group.
VLAN ID - The VID of the VLAN where the port is an untagged
member.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
View Multicast Hosts List
Number of Multicast Groups: 4
VLAN Port/ IGMP Exp.
MulticastGroup ID TrunkID HostIP Ver Time
------------------------------------------------------------
01:00:5E:00:01:01 1 6/- 172.16.10.51 v2 21
01:00:5E:7F:FF:FA 1 5/- 149.35.200.75 v2 11
01:00:5E:00:00:02 1 17/- 149.35.200.69 v2 34
01:00:5E:00:00:09 1 14/- 172.16.10.51 v2 32
U - Update Display
R - Return to Previous Menu
Enter your selection?