Allied Telesis AT-S62 - Manual (Page 720)

Chapter 32: PKI Certificates and SSL
720 Section VII: Management Security
Note
In the X509 Certificate Management Menu, MTrust means manually
trusted. This field indicates that you verified the certificate. The
Source field indicates the certificate was generated on the switch.
5. Type 1 to select Create Self-Signed Certificate.
The Create Self-Signed Certificate menu is shown in Figure 245.
Figure 245. Create Self-Signed Certificate Menu
6. Type 1 to select Certificate Name to enter a filename for the certificate.
The following message is displayed:
Enter certificate name (24 chars max) ->
7. Enter a filename for the certificate. This is the filename under which
the certificate will be stored as in the AT-S62 file system. The name
can be up to 24 alphanumeric characters. Spaces are allowed.
Note
The management software automatically adds a “.cer” extension to
the filename.
8. Type 2 to select Key Pair ID.
The following message is displayed:
Enter certificate Key Pair ID -> [0 to 65535] ->
Allied Telesyn Ethernet Switch AT-8524M - ATS62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Create Self-Signed Certificate
1 - Certificate Name.............
2 - Key Pair ID.................. 0
3 - Format....................... DER
4 - Serial Number................ 0
5 - Subject DN...................
6 - Create Self-Signed Certificate
R - Return to Previous Menu
Enter your selection?