Allied Telesis AT-S62 - Manual (Page 247)

AT-S62 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 247
Deleting All Classifiers
This procedure deletes all classifiers from the switch. To delete individual
classifiers, perform “Deleting a Classifier” on page 246.
You cannot delete the classifiers if any of them belong to an ACL or QoS
policy. All classifiers must be removed from their ACL and QoS policy
assignments before you can delete them.
To delete all classifiers, do the following:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 1 to select Classifier
Configuration.
The Classifier Configuration menu is shown in Figure 67 on page 241.
3. From the Classifier Configuration menu, type P to select Purge
Classifiers.
Caution
No confirmation prompt is displayed. All classifiers are immediately
deleted from the switch.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.