Allied Telesis AT-S62 - Manual (Page 128)

Chapter 7: MAC Address Table
128 Section I: Basic Operations
An example of a multicast MAC address table is shown in Figure 32.
Figure 32. Display All Menu - Multicast MAC Addresses
The information in this menu is for viewing purposes only. The
columns in a multicast MAC address menu are defined below.
MAC Address- The static or dynamic multicast MAC address.
VlanID - The ID number of the VLAN where the port is an untagged
member.
Type - The type of address: static or dynamic.
Port Maps - The tagged and untagged ports on the switch that are
members of a multicast group. This column is useful in determining
which ports belong to different groups.
The other options in the Display Unicast MAC Addresses menu or
Display Multicast MAC Addresses menu are:
2 - Display Static
This selection displays just the static addresses assigned to the ports
on the switch.
3 - Display Dynamic
This selection displays just the dynamic addresses learned on the
ports on the switch.
4 - Display by Port
Displays the dynamic and static MAC addresses of a particular port.
When you select this option, you are prompted for a port number. You
can specify more than one port at a time.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Display All
Page 1
Total Number of MCAST MAC Addresses: 1
MAC Address VLAN ID Type Port Maps (U:Untagged T:Tagged)
------------------------------------------------------------------------
01:00:51:00:00:01 1
Static U:1-4
T:
U - Update Display
R - Return to Previous Menu
Enter your selection?