Allied Telesis AT-S62 - Manual (Page 70)

Chapter 3: Basic Switch Parameters
70 Section I: Basic Operations
The Fan Control Configuration menu is shown in Figure 10.
Figure 10. Fan Control Configuration Menu
4. Type 1 to toggle the fan control feature On or Off. The default setting is
Off .
A change to the status of the fan control feature is immediately
implemented on the switch.
5. After making the change, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.
Displaying Fan
Control Status
To view the status of the fan control feature and the cooling fans in the
AT-8524POE switch, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 2 to select System
Configuration.
3. From the System Configuration menu, type 9 to select Fan Control
Configuration.
The Fan Control Configuration menu is shown in Figure 10.
4. Type 2 to select Show Fan Control Status.
Allied Telesyn Ethernet Switch AT-8524POE - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Fan Control Configuration
1 - Fan Control ...................... Off
2 - Show Fan Control Status
R - Return to Previous Menu
Enter your selection?