Allied Telesis AT-S62 - Manual (Page 148)

Chapter 8: Static and LACP Port Trunks
148 Section I: Basic Operations
The Port Trunking and LACP menu is shown in Figure 37.
Figure 37. Port Trunking and LACP Menu
3. From the Port Trunking and LACP menu, type 1 to select Static Port
Trunking.
The Static Port Trunking menu is shown in Figure 38.
Figure 38. Static Port Trunking Menu
This menu lists the trunks that already exist on the switch. The
information includes the following:
ˆ ID - The ID number of the static port trunk.
ˆ Name - The name of the static port trunk.
ˆ Ports - The ports of the static port trunk.
ˆ Method - One of the following load distribution methods:
SRC MAC Source MAC address.
DST MAC Destination MAC address.
SRC/DST MAC Source address/destination MAC address.
SRC IP Source IP address.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Port Trunking and LACP
1 - Static Port Trunking
2 - LACP Configuration
R - Return to Previous Menu
Enter your selection?
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Static Port Trunking
ID Name Ports Method Status
----------------------------------------------------
C - Create Trunk
D - Delete Trunk
M - Modify Trunk
R - Return to Previous Menu
Enter your selection?