Allied Telesis AT-S62 - Manual (Page 349)

AT-S62 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 349
Options 2, Maximum Available Power, displays the maximum amount
of PoE for the switch. For the AT-8524POE switch, this value is 400W.
This value cannot be changed.
4. From the PoE Global Configuration menu, type 1 to select Power
Threshold.
The following prompt is displayed:
Enter percentage of power limit threshold : [1 to 100] -
> 95
Enter the new threshold as a percentage of the total available PoE
power on the switch. As an example, to configure the switch to enter
an event in the event log and send an SNMP trap when power
consumption exceeds 300 W, you would enter 75, for 75%.
The new threshold is immediately activated on the switch.
5. After making the change, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.