Allied Telesis AT-S62 - Manual (Page 342)

Chapter 18: Denial of Service Defenses
342 Section II: Advanced Operations
A menu is displayed containing either one or two options, depending
on the DoS defense you selected. An example of the menu is shown in
Figure 115.
Figure 115. SYN Flood Configuration Menu
6. Adjust the parameter settings as needed. The parameters are defined
below.
DoS Status
Enables and disables the selected DoS defense on the selected ports.
The default is disabled.
2 - Mirroring Attack Pkt
This option is displayed with the Land, Tear Drop, Ping of Death, and
IP options defense mechanisms. You can use this option to mirror the
traffic examined by a defense mechanism to another port on the
switch. For background information, refer to “Mirroring Traffic” on
page 338. To use this feature, you must activate port mirroring on the
switch and specify a destination mirror port, as explained in “Creating
a Port Mirror” on page 167. Mirroring traffic is not required.
7. Repeat this procedure starting with Step 3 to configure other DoS
defenses.
8. Return to the Main Menu and type S to select Save Configuration
Changes.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
SYN Flood Configuration
Configuring DoS for Port 2
1 - DoS Status ................. Disabled
R - Return to Previous Menu
Enter your selection?