Allied Telesis AT-S62 - Manual (Page 527)

AT-S62 Management Software Menus Interface User’s Guide
Section IV: Spanning Tree Protocols 527
The following prompt is displayed:
Enter new priority [the value will be multiplied by
4096]: [0 to 15] ->
3. Enter the increment that represents the new CIST priority value. The
range is 0 (zero) to 61,440 in increments of 4,096, with 0 being the
highest priority. For a list of the increments, refer to Table 11, “Bridge
Priority Value Increments” on page 485.
The change is immediately implemented on the switch.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.