Allied Telesis AT-S62 - Manual (Page 477)

AT-S62 Management Software Menus Interface User’s Guide
Section III: SNMPv3 477
Displaying the
Display SNMPv3
Notify Table
Menu
This section describes how to display the Display SNMPv3 Notify Table
Menu. For information about the SNMPv3 Notify Table parameters, see
“Creating an SNMPv3 Notify Table Entry” on page 429.
To display the Display SNMPv3 Notify Table Menu, perform the following
procedure.
1. Follow steps 1 through 3 in the procedure described in “Displaying the
Display SNMPv3 User Table Menu” on page 472. Or, from the Main
Menu type 5->5->6.
2. From the Display SNMPv3 Table Menu, type 5 to select Display
SNMPv3 Notify Table.
The Display SNMPv3 Notify Table Menu is shown in Figure 154.
Figure 155. Display SNMPv3 Notify Table Menu
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Display SNMPv3 Notify Table
Notify Name ...................... testengineeringTrap
Notify Tag ....................... testengineeringtag
Notify Type ...................... Inform
Storage Type ..................... NonVolatile
Row Status ....................... Active
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?