Allied Telesis AT-S62 - Manual (Page 626)

Chapter 27: Protected Ports VLANs
626 Section V: VLANs
Displaying a Protected Port VLAN
To view the name, VID number, and member ports of all the VLANs on a
switch, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 188 on page 559.
2. From the VLAN Configuration menu, type 5 to select Show VLANs.
The Show VLANs Menu is shown in Figure 214.
Figure 214. Show VLANs Menu
The menu contains the following columns of information:
VID - The VLAN ID.
VLAN Name - The name of the VLAN.
VLAN Type - A VLAN type of “Port Based” indicates a port-based or
tagged VLAN. A VLAN type of “GARP” indicates a VLAN created
automatically by GVRP. A VLAN type of “Protected” indicates a
protected ports VLAN.
Protocol - If this column is blank, the VLAN is a port-based, tagged, or
protected ports VLAN. If it contains “GARP,” the VLAN or the port is a
dynamic GVRP VLAN or a dynamic GVRP port of a static VLAN.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Show VLANs
VID VLAN Name VLAN Type Protocol Member Port(s)
----------------------------------------------------------------
1 Default_VLAN Port Based U: 25
T:
4 Sales Port Based U: 1-11
T:
5 Internet_VLAN Protected U: 12-24
T: 25
N - Next Page
U - Update Display
D - Detail Information Display
R - Return to Previous Menu
Enter your selection?