Allied Telesis AT-S62 - Manual (Page 726)

Chapter 32: PKI Certificates and SSL
726 Section VII: Management Security
3. Type 2 to select State and specify if a certificate is trusted or untrusted.
Trusted - This value indicates you have verified that the certificate is
from a trusted CA. This is the default.
Untrusted - This value indicates the certificate is from an untrusted
CA either because you have not verified the CA or you have verified
the CA is untrusted.
4. Type 3 to specify the type assigned to the certificate. There are 3 types
to choose from:
EE - This value indicates the End Entity type. When you specify this
type, the switch tags the certificate to indicate that it belongs to another
end entity. This is the default.
CA - Use this value for a certificate issued by a public or private CA.
Self - Use this value for a self-signed certificate. This type of certificate
is created by the switch itself. The switch treats this type of certificate
as its own.
5. Type 4 to select Modify Certificate.
Your changes are implement in the certificate.
The following message is displayed:
Please wait while certificate is updated...Done.
6. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.