Allied Telesis AT-S62 - Manual (Page 568)

Chapter 24: Port-based and Tagged Virtual LANs
568 Section V: VLANs
Any untagged ports removed from a VLAN are automatically returned
to the Default_VLAN as untagged ports.
If you added or removed from the VLAN a port with one or more static
MAC addresses assigned to it, you must update the static addresses
by deleting their entries from the MAC address table and reentering
them again using the VID of the VLAN to which the port has been
moved to. For information on how to add static MAC addresses, refer
to “Adding Static Unicast and Multicast MAC Addresses” on page 130.
For instructions on how to delete addresses, refer to “Deleting Unicast
and Multicast MAC Addresses” on page 132.
8. Press any key.
The Modify VLAN menu in Figure 191 on page 565 is displayed again.
9. Repeat this procedure starting with Step 4 to modify other VLANs, or
return to the Main Menu and type S to select Save Configuration
Changes.