Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 82)

82 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 3 Energy Data Collector Configuration
7. Double-click the input parameter field, then
click the pull-down menu icon
to display the input controller tags.
Refer to the CompactLogix tab of the Energy
Data Worksheet for the local I/O digital or
analog input address.
8. Navigate to the desired digital or analog input
tag.
This example shows Local:1:I.Data.
9. For digital input tags:
a. Click the tag pull-down menu icon to display
a table of data bits.
b. Click the bit associated with the hardware
terminal wired to your digital input.
For analog input tags:
a. Click the tag pull-down menu icon to display
the channel tags.
b. Double-click the channel data tag associated
with the hardware terminal wired to your
analog energy input.
The analog input channels must also be
enabled.
c. Double-click Analog I/O under IO Configuration to launch the module properties and enable the channels that
will be used.