beautypg.com

Configure powermonitor 5000 unit faceplates – Rockwell Automation Energy Management Accelerator Toolkit Quick Start User Manual

Page 238

background image

238

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014

Chapter 11

FactoryTalk View ME Energy Faceplates

Configure PowerMonitor 5000 Unit Faceplates

The ME PowerMonitor 5000 Faceplate files lets you quickly load, configure, and use a preconfigured status display or
‘faceplate’ for the PowerMonitor 5000 using FactoryTalk View Machine Edition.

These instructions are for PowerMonitor 5000 units communicating over the EtherNet/IP network only.

Shows voltage, current, and frequency status.

Shows the power status.

Shows real, reactive, and apparent energy odometers.
Also lets the operator configure the device name for
display at the top of the faceplate.

Only the most critical alarms are displayed on the
PowerMonitor 5000 faceplate.
• Metering Conditions - Loss of Metering Voltage
• Over Range - Voltage/Ampere Over Range
• Power Quality - Sag/Swell Detected

VIF Display

PWR Display

Energy Display

Alarm Display