Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 264)

264 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
4. Folow these steps to use a bitmap image with the button.
a. Click the Label Tab and click the ellipse button next to the Image field.
b. Click Add from File and select the PowerFlex Bitmap Image located in the ME_PowerFlex_GotoButtons folder.
c. Click Open to add the image then OK to close the Image Browser window.
d. Add text in the Caption field if desired.
e. Click OK to close the Goto button properties window.
This is an example of a final goto button on your display.
To support additional PowerFlex devices, create a new Goto display navigation button, assign the PowerFlex faceplate
display, and assign a unique parameter file associated with the additional device.
IMPORTANT You only need to add the image from File the first time you use the image. Once added, the image can be selected from the
image list.