Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 115)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 115
FactoryTalk EnergyMetrix Groups and Security Setup Chapter 5
Create a Role and Assign Privileges
Follow these steps to create a role and assign privileges.
1. Click Roles and Users on the System tab.
2. Click Add.
3. Choose a domain from the Parent group pull-
down menu.
For this example, choose Engineering.
4. Enter a role name.
For this example, enter Engineering Manager.
5. Assign all Admin privileges to the Engineering
Manager by moving all privileges from the
right pane to the left pane. Clicking the left
double-arrow icon will move all privileges in
one operation.
You can also move or assign individual
privileges by using the single arrow icons. To
select noncontiguous privileges, hold down the
Ctrl key while making selections.
The Engineering Manager has Admin
privileges, but only for the Engineering
subdomain. Refer to page
114 for a list of
Admin privileges.
6. Click Save.
You should see the Engineering Manager
role under the Engineering subdomain.