Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 180)

180 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 9 FactoryTalk EnergyMetrix Software Reports and Charts
Demand Analysis Report
A demand analysis report analyzes the electrical demand of plant areas so that you can make energy saving production
scheduling, and/or demand control decisions.
For the Efficient Industries Plant 1 example, you will create a report to list real power demand values for the plant’s electrical
submeters including all PowerMonitor 1000 meters: Boiler House, Power House, Production 1, Production 2, Shipping/
Receiving/DC.
Create and View Report
Follow these steps to set up and view a demand analysis report.
1. Click the Reports tab.
2. Navigate to and select a domain to create the
report for.
For this example, select the Engineering
subdomain.
Only users with access to the domain will be
able to view the report.
3. Click Add.
4. Enter a Report name.
For this example, enter Electrical Demand
Analysis Report.
5. Choose the Demand Analysis Report
template.
6. Accept the default Report file.
7. Verify the Report parent group.
For this example, Engineering was
selected in step 2.
8. Select the meters or groups to include in
the report.
For this example, select the meters as
checked.
9. Click Save.
The report appears under the Engineering domain.