Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 237)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 237
FactoryTalk View ME Energy Faceplates Chapter 11
4. Follow these steps to use a bitmap image with the button.
a. Click the Label Tab and click the ellipse next to the Image field.
b. Click Add from File and select the PowerMonitor500 Bitmap Image located in the ME PowerMonitor 500
Faceplates Files folder.
c. Click Open to add the image then OK to close the Image Browser window.
d. Add text in the Caption field if desired.
e. Click OK to close the Goto button properties window.
This is an example of a final goto button on your display.
5. To support additional PowerMonitor 500 devices, create a new Goto display navigation button, assign the
PowerMonitor500 faceplate display, and assign a unique parameter file associated with the additional device.
IMPORTANT You only need to add the image from File the first time you use the image. Once added, the image can be selected from the
image list.