Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 426)

426 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Appendix B Custom Units and Value Types
Create Base Units
1. Click Add on the Base Units tab.
2. Enter the base unit text.
For this example, enter Gal for fuel oil,
propane, and water.
3. Click Save.
4. Repeat steps 1…3 to add therms (thm), cubic feet
(cf ), and pounds (lbs).
When done, you should see cf, thm, and lb in the
Base unit list.