Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 195)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 195
FactoryTalk EnergyMetrix Software Reports and Charts Chapter 9
For this example, RealEnergyNet is selected. Data is trended for the tag displayed under the chart, in the specified
unit.
6. Select a start and end date for the trend by using the calendars.
Or, enter the start and end dates into the data entry fields then click Go.
For this example, August 1, 2009 through August 31, 2009 is selected.
7. Optionally, choose another meter tag from the list.
You can view up to five tags in a standard trend chart. Trend selections are active until you log out or remove from the
chart.
TIP To add a tag from another meter, navigate to and select the other meter on the meters tab, then choose a tag
from its list.