Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 404)

404 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 13 Time of Day Control
Configure Communication
Follow these steps to configure communication.
1. Double-click Communication Setup under RSLinx Enterprise in the
Explorer window.
You will see this dialog box if a communication setup does not exist.
2. Select Create a new configuration and click Finish.
3. Click Add under Device Shortcuts to create a new shortcut, then
rename the shortcut TOD.
4. Click the Design Local tab.
5. Expand the Ethernet network and select the controller containing the
TOD program.
6. Verify that the shortcut name is highlighted, then
click Apply.
7. Click Yes to apply the changes when prompted.
8. Click Copy from Design to Runtime to copy
changes to the runtime communication setup.
9. Click Yes when prompted to continue with the copy operation.
10. Click OK at the bottom of the RSLinx Enterprise dialog box to save
the communication setup changes.