Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 247)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 247
FactoryTalk View ME Energy Faceplates Chapter 11
4. Folow these steps to use a bitmap image with the button.
a. Click the Label Tab and click the ellipse button next to the Image field.
b. Click Add from File and select the PowerMonitor5000 Bitmap Image located in the ME PowerMonitor 5000
Faceplates Files folder.
c. Click Open to add the image then OK to close the Image Browser window.
d. Add text in the Caption field if desired.
e. Click OK to close the Goto button properties window.
This is an example of a final goto button on your display.
To support additional PowerMonitor 5000 devices, create a new Goto display navigation button, assign the
PowerMonitor5000 faceplate display, and assign a unique parameter file associated with the additional device.
IMPORTANT You only need to add the image from File the first time you use the image. Once added, the image can be selected from the
image list.