Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 48)

48 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 2 System Configuration and Wiring
Create Energy Panel Layout and Wiring Drawings
The toolkit provides energy data collector panel layout and wiring drawings in DWG, DXF, and PDF file formats to help
you plan the layout of your energy system. The files are organized by device (CompactLogix, PM1000, PM3000,
PMW250, PM500, and PM5000). The drawings include power and control wiring.
If you do not have CAD software, use the pdf files to build your system drawings.
Use CAD Drawings from Toolkit
Follow these steps to access the AutoCAD drawings for each device in your Energy Data Worksheet.
1. Browse to and open the System
Layout and Wiring folder on the
Energy Management Accelerator
Toolkit CD image.
2. Navigate to the desired files based
on your device and file format
(DXF, DWG, or PDF).
3. Add the required files to your project or copy them to your project folder.
The drawings were created using AutoCAD Electrical. The project files are included in the DWG folder. The path
references in the project file are the default AutoCAD Electrical installation path.