Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 199)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 199
Chapter
10
FactoryTalk EnergyMetrix Software and PowerMonitor Device
Maintenance
Introduction
This chapter describes ways to maintain your power monitoring system to achieve a high level of performance on an
ongoing basis.
Before You Begin
• Determine business goals, complete energy assessment, and determine monitoring methods ( Chapter 1 ).
• Select hardware and wire devices ( Chapter 2 ).
• Configure data collection devices ( Chapter 3 ).
• Install FactoryTalk EnergyMetrix software ( Chapter 4 ).
• Complete FactoryTalk EnergyMetrix software chapters ( Chapter 5 through ( Chapter 9 ).
What You Need
• For FactoryTalk EnergyMetrix software updates:
– Updated FactoryTalk EnergyMetrix software CD, catalog number 9307-FTEMMENE
– Downloaded software updates from the Rockwell Automation website at
http://www.rockwellautomation.com/
support.
• For FactoryTalk EnergyMetrix software upgrades:
– Product option license
– Activation master disks or FactoryTalk activation data
• For PowerMonitor firmware updates:
– RS-232-to-RS-485 converter such as B&B Electronics USOPTL4
– Downloaded firmware update from the Rockwell Automation Knowledgebase at
http://www.rockwellautomation.com/knowledgebase.