Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 132)

132 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 6 FactoryTalk EnergyMetrix Software Device Setup
Configure OPC Server Device
Follow these steps to configure an OPC Server device.
1. Select the Devices folder.
2. Navigate to and select he desired
group or domain.
For this example, select the
Electricity group under the
Engineering subdomain.
3. Click the Add a device link.
4. Choose a subdomain or group from the
Parent group list.
For this example, choose Electricity.
5. Check the boxes as shown.
6. Choose a device from the Device class list.
For this example, choose
OPC Server on Ethernet.
7. Enter a device name.
For this example, enter Data Center.
8. Enter the OPC server name.
For this example, the name is
Kepware.KepServerEx.v5.
9. Click Save.
You should see Data Center under Electricity.
The icon shows that the device is an OPC
server.
All devices are now configured.