Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 291)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 291
FactoryTalk View ME Energy Faceplates Chapter 11
4. Folow these steps to use a bitmap image with the button.
a. Click the Label Tab and click the ellipse button next to the Image field.
b. Click Add from File and select the E300 Bitmap Image located in the ME E300 Faceplate Files folder.
c. Click Open to add the image then OK to close the Image Browser window.
d. Add text in the Caption field if desired.
e. Click OK to close the Goto button properties window.
This is an example of a final goto button on your display.
To support additional E300 modules, create a new Goto display navigation button, assign the E300 faceplate display, and
assign a unique parameter file associated with the additional device.
IMPORTANT You only need to add the image from File the first time you use the image. Once added, the image can be selected from the
image list.