Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 117)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 117
FactoryTalk EnergyMetrix Groups and Security Setup Chapter 5
You should see the Account 1 user under the
Accounting Manager role.
6. Repeat steps 1…5 to add additional users.
For this example, add two more users.
• Production 1
• Engineering 1
When done, Roles and Users should look like this.
TIP
AND
You can assign more than one role to a user. For example, a user may have viewing (read-only) access to meters and
published reports, but admin (read and write) access to a personal scratch-pad domain.