Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 313)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 313
FactoryTalk View ME Energy Faceplates Chapter 11
Create Display Navigation Button
A display navigation button must be created to launch the CIP Motion Energy Faceplate at runtime. This can be drawn
over an existing graphic object that represents the device you intend to monitor/control or it can be configured to use a
bitmap image as the display.
1. From the display where you want to launch the faceplate (can be a new or an existing display), choose Objects >
Display Navigation > Goto.
2. Draw the Goto button rectangle.
3. Double-click the Goto button to configure its properties
a. Modify the appearance as desired for your application (choose Transparent as the Back style if you are drawing the
goto button over an existing object on your display).
b. Click the ellipse next to the Display field and assign the CIPMotion_Faceplate_EnergyOnly display.
c. Click the ellipse next to the Parameter file field and assign the CIPMotion parameter file you created earlier for
this intended device.